High Flow Manual Nozzle (190-32)

APPLICATION

The Treloar 190 Series Nozzle has long provided the oil industry with a reliable, robust piece of dispensing equipment for bulk fuel delivery. It derives its reliability from a rugged design coupled with excellent flow performance.

FEATURES

• Easy Opening – accurate “topping-off” the secondary poppet lifts first reducing the operator effort to open and allowing low flow control.
• Straight line design – allows adequate lever holding and easy control.
• Heavy ribs and large wear lugs – give the nozzle long service life even when given rough usage.
• “Squared-off” hanger – allows filing of inlet pipes close to walls with subsequent easy and safe operation – no need to tilt or twist the nozzle and hose.
• Available with following Options:
(a) Outlet check valve – to eliminate draining of nozzle and hose. An N.S.C. requirement on Retail Metering Systems.
(b) Lever hold open clip – eliminates the need to physically hold open the nozzle.
• VITON SEAL Version – Available with Viton seals, adjustable stem packing gland and a hold open rack.
• Nozzles for aviation and jet fuel are available – refer to190GA/190GJ

SPECIFICATIONS

Inlet thread: 32mm (1¼”) BSP Taper Female.
Maximum static pressure: 500 kPa (75psi)
Maximum recommended flow rate: 200 litres/min (45 GPM)
190B – Bronze for mining
190V – comes with 14kpa check valve
190A – comes with adjustable stem
190S – comes with spout strainer